Wireless Power Transfer

Introduction

We can non conceive of modern universe without power and twenty-four hours by twenty-four hours, the use of power is increasing, but utilizing it in the most effectual manner is the biggest concern now. After the radical alteration in engineering site, sometimes the manner of power transportation is a weighty issue. Wireless power transmittal is necessary in instances where fleeting power transportation is needed, because sometimes semisynthetic music directors are non perfect for power transmittal in few sectors. Wireless Power Transfer ( WPT ) is a transmittal where electrical energy is transmitted from a power beginning to an electrical burden through an air spread with the aid of electromagnetic field. In last few old ages, there is a dramatic advancement in this sector but still it is in child degree.

Background and aim

Wireless power transmittal is a construct which was proposed by Nicola Tesla in the late 1800s.That clip it may sound futuristic, but Tesla’s did it enormously. No uncertainty research workers have found safer and more effectual methods of wireless power transportation, since Tesla ‘s cardinal check. It is called resonating inductive yoke, the most promising engineering that has been bloomed. The engineering takes advantage of moving ridge harmonics. From two spirals, wave harmonics make a strong nexus of magnetic moving ridges and vibrate it. Although the original initiation spiral was created by Nicholas Callan ( 1799-1864 ) , in 1836 a priest and the professor of natural doctrine, but Nicola Tesla’s spirals created the discovery for Wireless power transmittal.

The chief point is why we want to utilize wireless engineering to route information when all the maps can be arranged with wired elements? Extinguishing reckons of overseas telegrams is the lone existent reply. Many medical equipments require a uninterrupted power beginning. If wires may set-up through someone’s organic structure, the hazard of shorting causes a hazard of infection for patients. Cell phones, earphones, game accountants, personal digital helpers ( PDAs ) and Internet contraptions all require a three to four pes single wire to utilize in the auto. Most of these wires are created an uncomfortable environment in the wire.

WPT utilizing magnetic:

Wireless Power transportation ( WPT ) is divided by two parts, one is near-field and another one is far-field parts. Although Radio Waves and LASER engineering are widely used for far-field part, but these are non excessively much efficient for near-field part. In near-field part, three techniques of wireless power transportation are used. Air ionisation is one of them, but it is a toughest technique and is non executable for practical execution. Other two techniques are really effectual, which are called magnetic inductive yoke and magnetic resonance inductive yoke.

Magnetic inductive yoke is the most comprehensive method of wireless power transmittal. Interior designers can acquire some benefits from magnetic initiation instead than the wireless moving ridges. If modulated magnetic field is used to direct a signal through the air allows for a low-priced, low-power communications system. Radio waves communicate by distributing a plane moving ridge in unfastened infinite. On the other manus magnetic system is based on quasi-static magnetic field which is around the transmission spiral.

It is based on the rule of change overing and conveying the magnetic flux ( ? ) between two spirals ( primary and secondary spirals ) which are non connected by wires. Transformer, electric coppice, radio bear downing tablets are the illustrations of magnetic initiation.

But this method is impractical when it comes to reassigning power to longer distances. For such an experiment, it is needed that the spirals are excessively close to each other so that the short magnetic field is produced. When it is a affair of long distance, a immense magnetic field is needed and spirals should be multiple. Due to the flow of magnetic field in different waies, counter steps should be calculated to salvage the power loss. May be this is theoretically possible but is non possible practically.

Magnetic resonance inductive yoke is the procedure which is used for longer distances power transportation. It is a combination of inductive yoke and resonance. Resonance is interacted with two objects really strongly. In this procedure capacitance is connected parallel to the spiral and spiral provides the induction. The resonating capacitances wipe out the divergent induction in the receiving system.

Resonance Inductive Coupling ( RIC ) is extremely effectual than inductive yoke ( IC ) and RIC can be transfer power to multiple devices whereas inductive yoke is reassigning power to individual device.

Magnetic initiation vs. Radio Waves:

Magnetic initiation can keep a scope bound which is around 3 metres. On the other manus, wireless waive is non governable and range bound is minimal 10 metres or more.

Related work:

When Tesla spiral is invented, the thought of wireless power was unveiled. Now “WiTricity” is an American technology company, but in 2007 WiTricity was a undertaking of MIT pupils, where research workers were able to successfully light a 60 W visible radiation bulb wirelessly, which was 7ft off. At a glimpse, it is originally extended version of magnetic initiation up to a few metres. The chief difference is resonance ; if the magnetic resonance is same for transmitter and receiving system, energy can expeditiously be transferred and loss of power is really little. Using resonance is about 106 times efficient than without resonance. The frequence of resonation can be measured by the equation given below.

Resonant Frequency = Coil Inductance x Capacitance

The dramatic accomplishment of the MIT research squad is how to ticket tune the application so that the close field addition distances for a few metres, on the other manus restricting the power radiated through the far field.

In 2008, Tesla’s experiment was rebuilt by Intel, which was wirelessly powering a light bulb. And in 2009, Sony exhibited a Television, which was wireless-powered at a scope of 20 inches.

Very recent April 17, 2014 was another discovery for Wireless power transportation utilizing magnetic resonance. Chun T. Rim, a professor of Nuclear & A ; Quantum Engineering at KAIST and his squad developed a system, which can bear down 40 smart phones at the same time, with a highest end product power of 209 W at 20 kilohertz and power beginning can 5 metres off from receiving system. The name of this system is “ Dipole Coil Resonant System ( DCRS ) ” which is an drawn-out version of inductive power transportation.

Using this system a big LED Television with 40 W-fans can be powered from maximal 5-meter distance.No uncertainty, that it is a radical accomplishment after WiTricity.

Advantages

1. Wireless charging: Now inductive bear downing has promised with our nomadic devices, Electric Vehicle wholly free from cord and it protects our connexions. When electronics are enclosed, there is no opportunity of corrosion. Sometimes embedded medical devices are needed to be charged, but the hazard of infection, wires penetrate through tegument should be avoided. Durability is another benefit of inductive charging.

2. High Efficiency over a Distance: Electricity, which is created by the beginning and is extremely efficient around several metres.

3. Penetrate and Frisk Around the barrier: Power transportation system is really flexible for industrial or commercial environment. Most of the edifices are furnished by wood, glass, plastics, fabrics etc. which are non created any obstructor of transmittal system. In add-on, the system has an ability to frolic around many metallic barriers.

4. Control the scope of power degree: It is possible to accomplish commanding power degree over distance. Wireless mouse and keyboard like electronic devices need milliwatts and when it is a affair of electric rider vehicle, so it gives you kilowatts.

5. Safe for nature: Cause of magnetic near field, this engineering is wholly free from Radiative manner and that’s why it is safe for nature. Biological beings are really decrepit interact with magnetic field. The world-renowned physicist Sir John Pendry of Imperial College London explains: “ The organic structure truly responds strongly to electric Fieldss, which is why you can cook a poulet in a microwave. But it does n’t react to magnetic Fieldss. Equally far as we know the organic structure has about zero response to magnetic Fieldss in footings of the sum of power it absorbs ” .

Research Aims:

Wireless coursers for Electric Vehicles ( EVs ) would be a convenient characteristic, which is given a great solution of avoid to retrieve the stopper in a power overseas telegram after parking the vehicle. Wireless bear downing for Electric Vehicles is a system necessitating high electrical power ( up to 100s of kW ) and broad country of wireless power transmittal which increases electromagnetic field exposure. There are two types of radio bear downing engineerings applicable for EVs. inductive power transportation ( IPT ) system, which is known as

Decision:

The Wireless Power Transmission was a legendary effort by Nikola Tesla. After 120 old ages, reproduced of Tesla’s experiment agencies, necessity of engineering can ne’er be hidden. Presently the engineering is in advancement and all the twenty-four hours by twenty-four hours research workers are seeking their best and defeated the powerful challenges. Although “WiTricity” and “ Dipole Coil Resonant System ( DCRS ) ” are about new engineerings, but the cardinal rule is magnetic inductive with resonance yoke.

However, the most update radio power transmittal system is excessively dearly-won and immature, but the twenty-four hours is non so far when wireless power transportation utilizing magnetic is the most diacritic and sustainable option of current system.

Mentions:

1 ) Sun-Hee Kim, Yong-Seok Lim, and Seung-Jun Lee, ” Magnetic Resonant Coupling Based

Wireless Power Transfer System with In-Band Communication” , JOURNAL OF

SEMICONDUCTOR TECHNOLOGY AND SCIENCE, VOL.13, NO.6, DECEMBER, 2013

2 ) S. Sheik Mohammed, K. Ramasamy, T. Shanmuganantham, “Wireless Power

Transmission – A Next Generation Power Transmission System” , 2010

International Journal of Computer Applications ( 0975 – 8887 ) ,

Volume 1 – No.13

3 ) Chun T. Rim, “Wireless power transportation achieved at 5-meter distance”

hypertext transfer protocol: //www.eurekalert.org/pub_releases/2014-04/tkai-wpt041714.php

4 ) Rajen Biswa, “Feasibility of Wireless Power Transmission” , May, 2012

5 ) Wireless Power Technology

hypertext transfer protocol: //www.wirelesspowerconsortium.com/technology/

6 ) Liguang Xie, Yi Shi Y, Thomas Hou,Wenjing Lou, ” Wireless Power Transfer and

Applications to Sensor Networks” , Virginia Polytechnic Institute and State University,

USA

7 ) Prof. Jenshan Lin, “Wireless Power Transmission: From Far-Field to Near-Field” ,

University of Florida Gainesville, Florida, USA