Sop for Msc in Electrical Engineering

e idea of the first cellular network was brainstormed in 1947. It was intended to be used for military purposes as a way of supplying troops with more advanced forms of communications. From 1947 till about 1979 several different forms of broadcasting technology emerged. The United States began to develop the AMPS (Advanced Mobile Phone Service) network, while European countries were developing their own forms of communication. 1. 2 History of GSM Technology Europeans quickly realized the disadvantages of each European country operating on their mobile network. It prevents cell phone use from country to country within Europe.

With the emerging European Union and high travel volume between countries in Europe this was seen as a problem. Rectifying the situation the Conference of European Posts and Telegraphs (CEPT) assembled a research group with intentions of researching the mobile phone system in Europe. This group was called Group Special Mobile (GSM). For the next ten years the GSM group outlined standards, researched technology and designed a way to implement a pan-European mobile phone network. In 1989 work done by the GSM group was transferred to the European Telecommunication Standards Institute (ETSI).

The name GSM was transposed to name the type of service invented. The acronym GSM had been changed from Group Special Mobile to Global Systems Mobile Telecommunications. By April of 1991 commercial service of the GSM network had begun. Just a year and half later in 1993 there were already 36 GSM networks in over 22 countries. Several other countries were on the rise to adopt this new mobile phone network and participate in what was becoming a worldwide standard. At the same time, GSM also became widely used in the Middle East, South Africa and Australia.

While the European Union had developed a sophisticated digital cell phone system, the United States was still operating primarily on the old, analog AMPS network and TDMA. Department of E&C 2010 Lovely Institute of Technology, Phagwara 2 RF OPTIMIZATION AND PLANNING In the end o the end of October 2001, Cingular was the first to announce their switch to the 3G GSM network. This involved switching more then 22 million customers from TDMA to GSM. In 2005 Cingular stopped new phone activation on the TDMA network and began only selling GSM service. 1. History of GSM in brief •1982:CEPT (Conference of European Posts and Telecommunications) establishes a GSM group in order to develop the standards for pan-European cellular mobile system •1988:Validation of the GSM System. •1991:Commercial launch of the GSM service. •1992:Enlargement of the countries that signed the GSM-MoU> Coverage of larger cities/airports. •1993:Coverage of main roads GSM services start outside Europe. •1995:Phase 2 of the GSM specifications Coverage of rural areas. 1. 4 GSM Frequency Band There are five major GSM frequencies that have become standard worldwide. They are following ¦GSM-1800 ¦GSM850 GSM-1900 ¦GSM-400 1. 4. 1 GSM-900 and GSM-1800 GSM-900 and GSM-1800 are standards used mostly worldwide. It is the frequency European phones operate on as well as most of Asia and Australia. 1. 4. 2 GSM-850 and GSM-1900 GSM-850 and GSM-1900 are primarily United States frequencies. They are also the standard for Canada GSM service and countries in Latin and South America. Most of the Cingular network operates on GSM 850, while much of T-Mobile operates at GSM-1900. T-Mobile however, has roaming agreements with Cingular. Meaning in the case of no service at GSM-1900, the phone will switch to GSM-850 and operate on Cingular’s network. . 4. 3 GSM-400 GSM-400 is the least popular of the bunch and is rarely used. It is an older frequency that was used in Russia and Europe before GSM-900 and GSM-1800 became available. There are not many networks currently operating at this frequency. .5 GSM Services . The GSM services are grouped into three categories: 1. Teleservices (TS) 2. Bearer services (BS) 3. Supplementary services (SS) 1. 5. 1 Teleservices Regular telephony, emergency calls, and voice messaging are within Teleservices. Telephony, the old bidirectional speech calls, is certainly the most popular of all services.

An emergency call is a feature that allows the mobile subscriber to contact a nearby emergency service, such as police, by dialing a unique number. Voice messaging permits a message to be stored within the voice mailbox of the called party either because the called party is not reachable or because the calling party chooses to do so. 1. 5. 2 Bearer Services Data services, short message service (SMS), cell broadcast, and local features are within BS. Rates up to 9. 6 kbit/s are supported. With a suitable data terminal or computer connected directly to the mobile apparatus, data may be sent through circuit-switched or packet-switched networks.

Short messages containing as many as 160 alphanumeric characters can be transmitted to or from a mobile phone. In this case, a message center is necessary. The broadcast mode (to all subscribers) in a given geographic area may also be used for short messages of up to 93 alphanumeric characters. Some local features of the mobile terminal may be used. These may include, for example, abbreviated dialing, edition of short messages, repetition of failed calls, and others. .5. 3 Supplementary Services Some of the Supplementary Services are as follows: 1.

Advice of charge:- This SS details the cost of a call in progress. 2. Barring of all outgoing calls: – This SS blocks outgoing calls. 3. Barring of international calls:- This SS blocks incoming or outgoing international calls as a whole or only those associated with a specific basic service, as desired. 4. Barring of roaming calls: – This SS blocks all the incoming roaming calls or only those associated with a specific service. 5. Call forwarding:- This SS forwards all incoming calls, or only those associated with a specific basic service, to another directory number.

The forwarding may be unconditional or may be performed when the mobile subscriber is busy, when there is no reply, when the mobile subscriber is not reachable, or when there is radio congestion. 6. Call hold: – This SS allows interruption of a communication on an existing call. Subsequent reestablishment of the call is permitted. 7. Call waiting: – This SS permits the notification of an incoming call when the mobile subscriber is busy. 8. Call transfer: – This SS permits the transference of an established incoming or outgoing call to a third party. 9.

Completion of calls to busy subscribers: – This SS allows notification of when a busy called subscriber becomes free. At this time, if desired, the call is reinitiated. 10. Closed user group:- This SS allows a group of subscribers to communicate only among themselves. 11. Calling number identification presentation/restriction: – This SS permits the presentation or restricts the presentation of the calling party’s identification number (or additional address information). 12. Connected number identification presentation: – This SS indicatChapter 2 GSM Identitieses the phone number that has been reached Chapter 2 GSM Identities 2.

Classification of GSM IDENTITY NUMBER ¦Mobile Station ISDN Number (MSISDN) ¦International Mobile Subscriber Identity (IMSI) ¦Mobile Station Roaming Number (MSRN) ¦International Mobile Station Equipment Identity (IMEI) ¦Location Area Identity (LAI) .2. 1 Mobile Station ISDN Number (MSISDN) The MSISDN is a number which uniquely identifies a mobile telephone subscription in the public switched telephone network numbering plan. According to the CCITT recommendations, the mobile telephone number or catalogue number to be dialled is composed in the following way: MSISDN = CC + NDC + SN CC = Country Code NDC = National Destination Code

SN = Subscriber Number E. g. 919822012345 = 91 + 98 + 22 + 012345 A National Destination Code is allocated to each GSM PLMN. In some countries, more than one NDC may be required for each GSM PLMN. The international MSISDN number may be of variable length. The maximum length shall be 15 digits, prefixes not included. 2. 2 International Mobile Subscriber Identity (IMSI) The IMSI is the information which uniquely identifies a subscriber in a GSM/PLMN. For a correct identification over the radio path and through the GSM PLMN network, a specific identity is allocated to each subscriber.

This identity is called the International Mobile Subscriber Identity (IMSI) and is used for all signalling in the PLMN. It will be stored in the Subscriber Identity Module (SIM), as well as in the Home Location Register (HLR) and in the serving Visitor Location Register (VLR). The IMSI consists of three different parts: IMSI = MCC + MNC + MSIN MCC = Mobile Country Code (3 digits) MNC = Mobile Network Code (2 digits) MSIN = Mobile Subscriber Identification Number (max 10 digits) e. g. 404 + 22 +0000123456 According to the GSM recommendations, the IMSI will have a length of maximum 15 digits.

All network–related subscriber information is connected to the IMSI 2. 3 Mobile Station Roaming Number (MSRN) HLR knows in what MSC/VLR Service Area the subscriber is located. In order to provide a temporary number to be used for routing, the HLR requests the current MSC/VLR to allocate and return a Mobile Station Roaming Number (MSRN) for the called subscriber At reception of the MSRN, HLR sends it to the GMSC, which can now route the call to the MSC/VLR exchange where the called subscriber is currently registered.

The interrogation call routing function (request for an MSRN) is part of the Mobile Application Part (MAP). All data exchanged between the GMSC – HLR – MSC/VLR for the purpose of interrogation is sent over the No. 7 signalling network. The Mobile Station Roaming Number (MSRN), according to the GSM recommendations, consists of three parts: MSRN = CC + NDC + SN CC = Country Code NDC = National Destination Code SN = Subscriber Number e. g. : 91 + 98 + 22 + 005XXX where, 005XXX is sent by MSC. 00 is for Pune MSC, 20 is for Nagpur MSC, 10 is for Goa MSC.

Note: In this case, SN is the address to the serving MSC The IMEI is used for equipment identification. An IMEI uniquely identifies a mobile station as a piece or assembly of equipment. (See IMEI, chapter 5. ) IMEI = TAC + FAC + SNR + sp TAC = Type Approval Code (6 digits), determined by a central GSM body FAC = Final Assembly Code (2 digits), identifies the manufacturer SNR = Serial Number (6 digits), an individual serial number of six digits uniquely identifying all equipment within each TAC and FAC sp = spare for future use (1 digit) e. g. 52518 + 00 + 581976 + 3 Where, 35 is for Nokia Handsets According to the GSM specification, IMEI has the length of 15 digits. 2. 5 Location Area Identity (LAI) LAI is used for location updating of mobile subscribers. LAI = MCC + MNC + LAC MCC = Mobile Country Code (3 digits), identifies the country. It follows the same numbering plan as MCC in IMSI. MNC = Mobile Network Code (2 digits), identifies the GSM/PLMN in that country and follows the same numbering plan as the MNC in IMSI. LAC = Location Area Code, identifies a location area within a GSM PLMN network.

The maximum length of LAC is 16 bits, enabling 65 536 different location areas to be defined in one GSM PLMN. E. g. 404 +22 + 10000 where 10000 is the LAC for Pune. 2. 6 Cell Global Identity (CGI) CGI is used for cell identification within the GSM network. This is done by adding a Cell Identity (CI) to the location area identity. CGI = MCC + MNC + LAC + CI CI = Cell Identity, identifies a cell within a location area, maximum 16 bits e. g. 404 + 22 + 10000 + 726 Where, 404 + 22 + 10000 is the LAI for Pune and 726 are the CI of one of the cells of Pune. CI is different for all the three sectors of the cell. . 7 Base Station Identity Code (BSIC) BSIC allows a mobile station to distinguish between different neighbouring base stations. BSIC = NCC + BCC NCC = Network Colour Code (3 bits), identifies the GSM PLMN. Note that it does not uniquely identify the operator. NCC is primarily used to distinguish between operators on each side of border. BCC = Base Station Colour Code (3 bits), identifies the Base Station to help distinguish between BTS using the same BCCH frequencies e. g. 71 Where 7 is the NCC for IDEA Operator. and 1 is the BCC. BCC can range from 0 to 7 Chapter 3 GSM Network Elements

GSM stands for Global System for Mobile communication & is a globally accepted standard for digital cellular communication. GSM is the name of a standardization group established in 1982 to create a common European mobile telephone standard that would formulate specifications for a pan-European mobile cellular radio system operating at 900 MHz. It is estimated that many countries outside of Europe will join the GSM partnership. GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware.

The reason for this is to limit the designers as little as possible but still to make it possible for the operators to buy equipment from different suppliers. The GSM network is divided into three major systems: ? The switching system (SS) ? The base station system (BSS) ?The operation and support system (OSS) 3. 1 GSM BASIC BLOCK DIAGRAM Department of E&C 2010 Lovely Institute of Technology, Phagwara 14 RF OPTIMIZATION AND PLANNING 3. 2 BASIC GSM NETWORK ARCHITECTURE 3. 2. 1 SWITCHING CENTRE Department of E&C 2010 Lovely Institute of Technology, Phagwara

Calculate the price
Make an order in advance and get the best price
Pages (550 words)
$0.00
*Price with a welcome 15% discount applied.
Pro tip: If you want to save more money and pay the lowest price, you need to set a more extended deadline.
We know how difficult it is to be a student these days. That's why our prices are one of the most affordable on the market, and there are no hidden fees.

Instead, we offer bonuses, discounts, and free services to make your experience outstanding.
How it works
Receive a 100% original paper that will pass Turnitin from a top essay writing service
step 1
Upload your instructions
Fill out the order form and provide paper details. You can even attach screenshots or add additional instructions later. If something is not clear or missing, the writer will contact you for clarification.
Pro service tips
How to get the most out of your experience with MyStudyWriters
One writer throughout the entire course
If you like the writer, you can hire them again. Just copy & paste their ID on the order form ("Preferred Writer's ID" field). This way, your vocabulary will be uniform, and the writer will be aware of your needs.
The same paper from different writers
You can order essay or any other work from two different writers to choose the best one or give another version to a friend. This can be done through the add-on "Same paper from another writer."
Copy of sources used by the writer
Our college essay writers work with ScienceDirect and other databases. They can send you articles or materials used in PDF or through screenshots. Just tick the "Copy of sources" field on the order form.
Testimonials
See why 20k+ students have chosen us as their sole writing assistance provider
Check out the latest reviews and opinions submitted by real customers worldwide and make an informed decision.
Philosophy
Thank you
Customer 452811, February 17th, 2024
Human Resources Management (HRM)
excellent
Customer 452773, June 25th, 2023
Business and administrative studies
excellent job! got an A, thank you
Customer 452773, May 24th, 2023
Social Work and Human Services
Although it took 2 revisions I am satisfied but I did receive it late because of that.
Customer 452603, March 25th, 2021
Business and administrative studies
excellent job!
Customer 452773, May 25th, 2023
business
Thank you for your hard work and help.
Customer 452773, February 13th, 2023
Business and administrative studies
excellent paper
Customer 452773, March 3rd, 2023
History
Looks great and appreciate the help.
Customer 452675, April 26th, 2021
Business and administrative studies
Excellent work ,always done early
Customer 452773, February 21st, 2023
Human Resources Management (HRM)
excellent job
Customer 452773, June 25th, 2023
English 101
great summery in terms of the time given. it lacks a bit of clarity but otherwise perfect.
Customer 452747, June 9th, 2021
Business and administrative studies
excellent job
Customer 452773, March 12th, 2023
11,595
Customer reviews in total
96%
Current satisfaction rate
3 pages
Average paper length
37%
Customers referred by a friend
OUR GIFT TO YOU
15% OFF your first order
Use a coupon FIRST15 and enjoy expert help with any task at the most affordable price.
Claim my 15% OFF Order in Chat
Close

Sometimes it is hard to do all the work on your own

Let us help you get a good grade on your paper. Get professional help and free up your time for more important courses. Let us handle your;

  • Dissertations and Thesis
  • Essays
  • All Assignments

  • Research papers
  • Terms Papers
  • Online Classes
Live ChatWhatsApp